Welcome to the forum!

As an adjunct to the Tangents blog, the intention with this forum is to answer any questions, and allow a diverse discussion of topics related photography. With that, see it as an open invitation to just climb in and start threads and to respond to any threads.

Nikon 'Set Picture Control' settings...

Hey all...

Shooting with Nikon D700.

Just curious as to whether the settings here: Standard, Neutral, Vivid effect RAW photos.  I shoot in RAW and wanted to see if adjusting these settings will help get better results 'in-camera' or should I continue to adjust in post.

Thanks

Dennis

Comments

  • When shooting raw these settings will reflect the look of the embedded JPG seen on the back of the camera. You will still have to adjust in post. 
  • TrevTrev Moderator
    edited November 2014

    Dennis,

    As Bob said, it only reflects on the embedded RAW jpeg and has no bearing on the RAW itself, which is governed by your WB and you need to adjust in post, however, have you read this article I posted about the Camera Profiles I use (only for Nikon) which to me gives a much better result from the get-go once you are in your RAW converter.

    Cheers,
    Trev
  • If you happen to use the Nikon raw converters (Nikon View NX2, Capture NX-D, or the now discontinued Capture NX-2), that software will detect the picture control you selected in camera for the NEF and use it as a default for the image. The software refers to it as 'recorded value' for the picture control setting. Since you shot it as NEF, you can change it if you want to something else.

    If you don't use the Nikon converters (eg. Lightroom, Photoshop, DXO, Capture One, etc.), the choice in camera has no bearing whatsoever, and the software won't even know the existence of a Nikon proprietary picture control.

    I find it helpful to select a picture control in camera that is typically close to how you might edit it, just so that the image displayed on the camera's LCD is somewhat close. I generally use a modified standard picture control, set for a little more sharpening than default, and I also bump up the saturation and contrast one notch each.
  • Thanks all for your advice.

    Did a lot of researching and found a ton of valuable info.  Going to try importing into LR using Vivid for now to see what I get.

    Thanks again

    Dennis
  • TrevTrev Moderator

    Dennis,

    I think you will be happy using the Camera Vivid on your Nikon files but read that link I gave above and change the contrast from Medium (default) to Linear as that profile will give darker contrast.
  • Trev, am I correct to understand that when I import into LR using Nikon Camera Vivid that when I view in "Develop" none of the sliders would have moved? The image woiuld just come in more fully vivid ready for additional processing? Can I also apply Camera Vivid by adjusting the first pic and then synchronizing the balance or does that affect the image differently than doing it during import? Thanks in advance for your assistance. It is much appreciated!
  • TrevTrev Moderator
    David,

    Yep, using Vivid (for Nikon files only as it's not available under the Camera Profile for Canon, etc.) will give you that extra boost colour and contrast.

    You can absolutely do it both ways, sometimes when I start an import I may have forgotten to apply the preset, so I just wait until all imported, and on the first image apply the preset, then select all, and sync those settings so all the files you now have are the same as the preset. Just make sure you do not do any changes to exposure, WB as that will then be applied across the board.

    It makes no difference if applied during or after import, it's the same preset.

    Have fun.


Sign In or Register to comment.