Nikon D200 custom settings
The Nikon D200 has been described as the ‘D2x Lite’, because it has most of the best features of the awesome D2x and added a few new features into the mix. Therefore this page is similar to the page on the D2x custom settings.
Here are my preferences for the Custom Settings .. and why.
The Custom Functions are grouped into 6 categories:
a – Autofocus
b – Metering / Exposure
c – Timers / AE & AF Lock
d – Shooting / Display
e – Bracketing / Flash
f – Controls
a1 .. AF-C mode priority
AF-C is the Continuous Focusing mode, where the shutter can be tripped whether the subject is in focus or not, ie, Release Priority. With this setting, you can turn AF-C into Focus Priority.
default : Release button (ie, FPS is maintained),
my preference : default, (Release priority).
There are generally two ways that auto-focusing are used –
– Continuous Focusing, with the focusing enabled on the rear
AF-ON button. (See custom function a6.) This enables the photographer to use follow focus, and use the AF-ON button as a way of holding focus if necessary (by letting go of the AF-ON button). This is the way that most sport photographers use AF.
With this setting the photographer has a very powerful option – to change the usual behavior of AF-C mode in only tripping the shutter when the subject is in focus. Although, that said, I am not sure it is how most photographers would want to use Continuous Focusing.
Action photographers usually need the camera to accurately track the subject, and the shutter to fire when the photographer wants, without the camera deciding otherwise.
a2 .. AF-S mode priority
AF-S is the Single Focusing mode, where the shutter can only be tripped whether the subject is in focus, ie, Focus Priority.
With this setting, you can turn AF-S into Release Priority.
default : Focus Priority,
my preference : default.
My preference is for the camera’s shutter to only fire when I’ve acquired focus. Then I can lock focus by keeping the shutter button slightly in – allowing me to recompose the picture.
As an aside .. with previous generations of Nikon cameras, my preference was for the camera to be set to AF-S mode, and with Single Frame Advance, since this way it allowed me to focus on a subject, re-frame, and shoot a sequence with that point of focus locked by the shutter button. (If I had my camera set to Continuous Frame Advance without selecting AF-ON activation, then the camera would’ve re-focused after the first photo was taken, and I will need to go through the routine again to lock focus, re-frame and shoot.)
a3 .. Focus Area Frame
With this setting the shape of the grouping of the auto focus sensors are controlled in Group Dynamic AF – as well as whether the central sensor is given preference, or the subject that is closest to the camera is given preference.
default : Normal frame (11 area),
my preference : default.
This custom function is entirely dependent on the individual photographer’s style and needs.
a4 .. Group dynamic AF
With this setting the shape of the grouping of the auto focus sensors are controlled in Group Dynamic AF – as well as whether the central sensor is given preference, or the subject that is closest to the camera is given preference.
default : Pattern 1,
my preference : default.
This custom function is entirely dependent on the individual photographer’s style and needs. And the way this function operates also makes more sense in conjunction with the user manual.
a5 .. Lock-On
With this option you can control whether Focus Tracking is disabled with Lock-On.
default : Normal,
my preference : default.
This setting controls the behavior of AF-C mode in that the camera allows for sudden changes in the subject movement.
The best resource on the implications of this setting, can be found on Digital Darrell’s website: Lock On – Does it Work?
(This is for the D2x, but it relates directly to the D200 as well.)
a6 .. AF activation
With this setting you dictate whether auto-focusing is initiated via either the shutter button or the AF-ON button, or just the AF-ON button.
default : shutter button / AF-ON,
my preference : default.
The choice here is closely linked to how you prefer activating auto-focus and your choice of focusing mode (AF-C or AF-S), since the behaviors of each mode changes slightly whether you focus with the shutter button or the AF-ON button.
I prefer the default because I mostly use my camera in AF-S focusing mode, and use my shutter button to activate and hold auto-focus.
Most sport photographers however, use the AF-ON button to activate auto-focus. Setting custom function a5 to AF-ON, makes most sense if you use Continuous Focusing mode (AF-C), since this setting will then allow you to lock focus by simply releasing the AF-ON button.
With Nikon’s cameras, when you use AF-S focusing mode, you will need the camera to achieve focus before it will fire in AF-S mode, if you focus with AF-ON. This makes it (for me at least), a clumsy way of using auto-focus.
a7 .. AF Area Illumination
This option controls whether the active focus area is illuminated in red in the viewfinder.
default : Auto,
my preference : ON.
I like having it on – then it is immediately obvious at all times exactly where the camera is focusing.
a8 .. Focus Area
This setting controls whether the focusing sensor selection wraps around, or not.
default : OFF,
my preference : default.
a9 .. AF Assist
This option controls whether the auto-focus assist light comes on in low light to help auto-focus latch onto the subject.
default : ON,
my preference : OFF.
The bright lamp light can be annoying and intrusive at inopportune moments, so I keep it switched off.
a10 .. AF-ON button for MB-D200
The functions assigned to the Vertical AF-ON button are determined with this custom setting.
default : AF-ON + focus area,
my preference : default.
The default here makes the most sense. It allows you to control the positioning of the active auto focus sensor, as well as initiate auto focus. If you don’t use the AF-ON button at all to initiate auto focus, then you can set this option to only allow control of the auto focus sensors with the vertical AF-ON button.
b1 .. ISO auto
This setting allows the camera to automatically adjust the ISO upwards if the camera decides that proper exposure can’t be achieved at the current exposure settings.
My recommendation with the D2x was to keep this OFF, because of the simplistic way it was implemented.
But with the D200 and the D80, the ISO auto setting has become flexible enough to be more generally used.
default : OFF,
my recommendation : OFF, unless you have a specific need for it.
With the Auto ISO setting ON, you will run into a problem with your camera if you use manual metering mode. Auto ISO will override your manual metering settings every time if it is any different from what the camera’s meter says – thereby completely negating the very reason for Manual Metering’s existence.
This will obviously cause problems as well when Auto ISO is used with studio lighting. Since there is no way for the camera to know what you are doing with the studio lights, the camera’s metering will perceive there not to be enough available light to take the photograph under the specific settings – and it will bump up the ISO in an attempt to get ‘correct’ exposure. This causes major over-exposure with the studio lights. If you were metering for 200 ISO with your flash meter, and the camera bumps your ISO to 1600, then your photos will be over-exposed by 3 stops.
The D80 has an interesting and potentially useful application of the Auto ISO feature, where the camera will bump up the ISO to try and get a minimum shutter speed – while still keeping the ISO to a maximum that you’re happy with.
This could be quite useful in helping to eliminate camera shake or subject movement, by having the camera automatically adjust the ISO. This might be a feature worth trying out, but just make sure that the Auto ISO feature doesn’t make your exposure metering inconsistent in manual metering.
There are two other scenarios where you might want to consider Auto ISO.
- If you should need a very specific shutter speed and aperture, which you then set in manual metering mode. Then, to accommodate lighting changes, you could have the camera adjust the ISO automatically to match the meter reading at that point.
- Also, if in Shutter Priority mode, if you wanted to work only within a certain range of apertures, you could use Auto ISO to keep your auto exposures correct when you move out of the range of possible apertures.
But these would be unusual situations, and for all practical purposes, I would still recommend that the ISO Auto setting be set to OFF.
b2 – ISO step value
This custom setting controls whether the shutter speed / aperture increments are in full or 1/2 or 1/3 steps.
default : 1/3 step,
my recommendation : 1/3 step.
Controlling the ISO is as important as controlling aperture and shutter speed in getting to the correct exposure. Since an increase in ISO means an increase in noise, it makes sense to have the ISO increments as small as 1/3rd stop to make for incremental jumps in adjustment.
b3 .. EV step
This custom setting controls whether the shutter speed / aperture increments are in full or 1/2 or 1/3 steps.
default : 1/3 step,
my recommendation : 1/3 step.
This one is personal preference. I have mine set to 1/3rd steps, because it allows better fine tuning of exposure and exposure compensation – which is essential with digital capture. However, I can see how it might be easier or more convenient in some cases to be able to set 1/2 stop apertures and shutter speeds.
b4 .. Exposure comp. EV
This custom setting controls whether the exposure compensation increments are in full or 1/2 or 1/3 steps.
default : 1/3 step,
my preference : 1/3 step.
Once again, this is entirely personal preference. Setting exposure compensation in wider steps than 1/3 stop settings might make bracketing over a wider rage easier, but I still think that using 1/3rd stop increments allow for finer tuning of exposure.
b5 .. Exposure comp.
This custom setting dictates whether the [+/-] is needed as well to dial in exposure compensation, or whether exposure compensation can be dialed in with the CMD dial only.
default : [+/-] & CMD dial,
my preference : keep it to the default.
If this setting is changed from the default, then a simple twiddle of the dials will change exposure compensation – very nifty, but all too easy to do by accident when using the camera in day to day photography. It’s simply safer to keep it to the default, where there is an extra safeguard in that the [+/-] button has to be pushed as well, before exposure compensation can be set.
Since I nearly always shoot in Manual Exposure mode anyway, this setting wouldn’t affect my normal operation of the camera. But I can see how this setting would be of real value to someone who shoots constantly in a specific auto mode such as Aperture Priority, where fast access to exposure compensation would be of great help.
b6 .. Center weighted metering
This custom setting controls the size (and hence precision) of the center-weighted metering selection.
default : 8mm,
my preference : 8mm.
This very useful setting allows you to set the metering area wider or much narrower for center-weighted metering. At the narrowest setting it acts like a wide spot-meter reading – not as highly selective as a spot-meter reading, but still precise enough to make specific meter readings off a scene.
Exactly how wide or tight you set the metering pattern is up to personal preference, but my feeling here is that anyone who has a precise approach to exposure metering, would select one of the smaller areas as a default.
b7 .. Fine Tune Optimal Exposure
This custom setting is a very powerful tool. Many photographers want their images to be brighter or darker than the camera gives at the correctly metered default. With this setting you can bias the exposure without having the exposure compensation warning. ie .. this is like permanent exposure compensation built in for each of the metering modes.
default : NO,
my preference : default.
I personally like the way that the Nikon cameras meter, which tends to give more saturated images. This also helps protect the highlights with digital photography. But this really is a setting which elevates this camera out of the ordinary, allowing unprecedented control over exposure. Every photographer can now fine-tune the camera’s metering to his / her own taste.
c1 .. AE Lock
This option controls whether exposure will lock while the shutter-release is pressed half-way, or only with the AE-L/AF-L button.
default : AE-L Button
my recommendation : keep to the default.
The default makes sense here, since the other option is to have the shutter button work as the exposure lock, which can be confusing, since it links the point of focus to the place you meter – which should not be thought of as the same thing, since it isn’t.
With this default, Nikon is essentially disagreeing with its own default for option c2, because now they see the need to keep focus and exposure lock separate. And that’s the way it should be.
c2 .. AE-L / AF-L
This setting controls the behavior of the AE-L / AF-L button.
default : AE/AF Lock,
my recommendation : anything other than the default.
my preference : AE Lock
Exposure and Focus lock should not be linked. They have nothing to do with each other, since the point that you meter off is most likely not to be the same point you are focusing on. You really don’t want to limit yourself by having the AE Lock button to also be your Focus Lock. Either use the AE/AF Lock button as an AE Lock .. or .. an AF Lock, but not both at the same time.
Which setting you choose depends entirely on your shooting style. If you use Continuous Focusing often, then it makes sense to use this button as an AF lock or set as the AF-ON selection (which will remove the focusing action from the shutter button.
My preference is to use this button as the AE lock exclusively. I only shoot in Single-frame and Single-Servo AF since this combination allows me to use the shutter button as a focus lock between frames.
c3 .. Auto meter Off
This setting controls how long your camera’s meter reading is displayed in the viewfinder and on top of the camera.
default : 4 secs,
my preference : 16 secs.
Once again, this setting is entirely personal preference, but I like my meter reading to not disappear so soon after I active it with the shutter button. The battery of the D200 is long-lasting enough that the minor bit of power-saving by having a short meter display period, is off-set by the annoyance of having to press the shutter button repeatedly when taking meter readings.
c4 .. Self-timer
This setting controls how long the self-timer takes before tripping the shutter.
default : 2 secs,
my preference : 2 secs.
This setting should be up to personal preference, but I like a shorter self-timer setting, since I mainly use this to stabilize the camera from vibrations when working with the the camera on a tripod.
c5 .. Monitor Off
With this setting you control how long the LCD display stays up.
default : 10 secs,
my preference : 1 min.
I’m an incorrigible chimper. I like seeing what I just photographed, and also, the histogram and blinking highlights are indispensable tools. Therefore I *need* to chimp. Having a much longer LCD display time helps. Besides, others usually want to see what you just shot.
d1 .. Beep
This controls how loud / soft the camera beeps … or not, when acquiring focus or when using the self-timer. It is also used for a low shutter speed warning.
default : high,
my preference : off.
Personal preference again, but I prefer my camera to be quiet.
But I have to admit that the soft beep isn’t intrusive at all.
d2 .. Grid Display
This allows a grid pattern to be displayed in the viewfinder.
default : OFF,
my preference varies.
This one is personal preference. The display isn’t intrusive, and it is a useful guide to have as a reference to keep verticals and horizontals correct.
d3 .. Viewfinder warning
This custom setting enables or disables warnings in the viewfinder.
default : ON,
my preference : default.
This one is personal preference. But it makes sense to have a visual reminder of certain things, such as having set the camera to B&W mode.
d4 .. Shooting Speed
This setting controls the maximum frame rate when the camera is set to CL (continuous low-speed).
default : 3 fps
my preference : the default.
I don’t often shoot in Continuous frame-advance, since I prefer the Single Frame mode. Action photographers will set this option to their own requirements.
d5 .. Exposure Delay Mode
The shutter release is delayed by 0.4 sec from the moment you press the shutter button.
default : off,
my preference : default.
This option is essential for photographers who shoot at slow shutter speeds or do high-magnification work such as macro photography. The mirror flipping up causes a lot of internal vibrations, and this ‘mirror slap’ can cause photographs to show camera shake. With this setting, the mirror is flipped up instantly as you press the shutter button, but the shutter itself only opens 0.4 seconds later when the vibrations from the mirror flipping up, has been damped.
d6 .. File Number Sequence
This default chooses whether the file names reset to 0001 every time you use a new CF card or new folder, or whether the camera remembers the last file name used and keep numbering sequentially from there on.
default : OFF,
my recommendation : ON.
This is one of the settings which I recommend be changed from the default.
File No. Seq OFF – will name the image files the same every time you use a new memory card or a clean memory card. The file naming will resume from the last image recorded on the memory card. This means that if you use more than one memory card, you will have duplicate file names. Even if you only use one memory card, you run will most likely get to the point where you have to rename image files continually on your computer.
File No. Seq ON – will resume file naming from the last name used. So if you use more than one memory card, the file names will be different from each other on the different memory cards. This will save you the bother of having to rename files when you download it on the computer, or of having to keep image files from different memory cards in different folders in your computer.
Although, that said, I rename my files to more logical file names, as a matter of course on downloading my CF cards.
d7 .. LCD Illumination
This option controls whether the LCD lights up only when the power switch is rotated to the lamp position, or when any button is pressed.
default : Off,
my preference : On.
I most often work in dim areas, and I want to be able to read my LCD without having to precisely select the Lamp button. With this function selected, the LCD will light up whenever I hit any of the D200 camera controls. It just makes it easier for me when the LCD lights up as soon as I handle the camera – then it doesn’t become an extra control that I have to push.
d8 .. MB-D200 batteries
Here you select which batteries you are using in the MB-D200 grip, so that the correct battery levels can be displayed.
my suggestion : use EN-EL3e batteries.
If you use EN-EL3e batteries, which are the best choice of batteries for the D200, then this becomes a moot point.
e1 .. Flash Sync Speed
With this setting you control the maximum flash sync speed that the camera will be able to set.
default : 1/250th,
my recommendation : 1/250th (Auto FP)
I’m not sure why anyone would set a lower than maximum flash sync speed, unless perhaps you’re doing a lot of slow-sync flash photography in one of the auto modes. (But you’d still be better off doing it in Manual exposure mode.)
Even though using the Auto FP high-sync speed option drastically limits the range of the flash, it enables control over depth-of-field with the proper dedicated strobes such as the SB800. Most of the times that I use a sync speed higher than 1/250th I’m using the strobe as fill-flash only (and usually dialed down), so the loss in power isn’t really noticed.
e2 .. Flash Shutter Speed
Here you control the minimum flash sync speed that the camera will set in any of the auto modes.
default : 1/60th,
my preference : 1/30th.
I prefer a slower sync speed in order to allow more ambient light to register. But then, I would rarely use this since I don’t often use an auto mode. I prefer the more considered approach with Manual metering mode, that allows me to drag the shutter for the specific effect I want.
e3 .. Built-in Flash
This option controls which mode the built-in flash will use.
default : TTL
my recommendation : Commander mode.
Your decision here will rest on whether you need your built-in flash as the main flash or fill-flash (and then TTL would usually make the most sense), or whether you want to use the strobe as the Commander strobe to control a Slave flashgun (a remotely triggered SB-600 / SB-800).
My recommendation would be to keep it to the Commander mode. Since the built-in flash is about the worst kind of way to use flash, you really should be using a larger external strobe to give you more options in using flash photography.
With the built-in flash set to Commander mode, you can use your external Nikon strobe, and when you need wireless TTL flash, you can simply remove your Nikon Speedlight and you are immediately set to control the Nikon Speedlight in Commander mode.
e4 .. Modeling flash
With this custom setting you control whether the depth-of-field preview button acts as a trigger for the rapid burst from the Speedlight that acts as a modeling flash.
default : ON,
my preference : OFF.
This is helpful if you are using multiple Speedlights in a wireless TTL configuration, and it would then help to enable this at that time.
For a single on-camera strobe it makes less sense, since the modeling flash is already accessible as a button on the SB-800 Speedlight itself, and it doesn’t make much sense to tie up the depth-of-field preview button with this function.
e5 .. Auto bracketing set
e6 .. Manual mode bracketing
e7 .. Auto bracketing order
e8 .. Auto bracketing selection
These custom functions all control the way that auto-bracketing is set, and therefore is entirely up to the individual photographer’s way of working. I don’t use auto-bracketing, preferring a more specific approach to metering, so I keep these settings to the defaults.
f1 .. Center button
With this custom function, the operation of the center button of the multi-selector is defined for the Shooting Mode and Playback Mode.
Shooting Mode :
default : Center AF Area,
my preference : default
I like the default here over the other choice (Illuminate AF area), since this allows me to instantly re-select the center auto focus sensor if I have been using another focusing sensor instead.
Playback Mode :
default : Thumbnail on/off,
my preference : Zoom on/off.
I really like to be able to see a higher magnification of the image. And with the way the joystick works of the multi-selector, it is easy enough to move to any part of the image. Sweet!
f2 .. Multi selector
With this setting, the multi-selector can have an additional function when pressed.
default : do nothing,
my preference : the default.
Since I already have something assigned to happen when I press the multi-selector button, it is simpler to just have this CF set to do nothing.
f3 .. Photo Info / Playback
With this setting you can control which direction the multi-selector needs to be pushed to access the info screens for each image, or different images.
default : Playback <–>
my preference : Info <–>
With the D200, they changed the order of this command from how it is on the D2x. This is confusing if you use both cameras, so I set the D200 to work like the D2x.
f4 .. Assign FUNC. button
This option allows a variety of functions to be assigned to the FUNC button. It is in settings like this, that helps make the D200 shine as a powerful tool for the photographer.
default : FV Lock (the flash exposure is locked)
my preference : Flash Off (the Speedlight is disabled)
This setting is entirely personal preference, since there are a variety of options here that could be put to great use by different photographers. I like the idea of instantaneously being able to disable the flash by pressing the FUNC button, instead of having to pull my eye away from the viewfinder to switch the Speedlight off on the flashgun itself.
The default option is also a strong consideration, since it allows you to lock your flash exposure off a specific tonal value, and not have large areas of white or black throw off your TTL flash metering.
f5 .. Command dials
f6 .. Buttons and dials
Both these custom functions control how your camera’s dials and buttons react, and are purely personal preference, but the defaults are the most logical.
f7 .. No CF card ?
This option disables the shutter release if there is no CF card or if the CF card is full.
default : Lock,
my recommendation : Lock.
The default here makes a lot of sense. If you were to shoot continuously without stopping to check how many frames you have left, you really do want your camera to stop operating when the memory card is out, and not have you snap away, thinking you are getting the photograph, when you aren’t.
1maureen rigdon says
I recently purchased the Nikon D-300. I previously had the D-200. However, I’m having some trouble with the D-300. Do you have any recommendations for this camera. I’m trying to get clean, crisp prints of grandchildren.
Your comments will be appreciated.
2Marcus says
thanks for sharing your experience. I could even use many advices on my Fuji S5
3Amy says
Thanks for this Neil.
One point I thought I should clarify is that on my D200 with firmware 2.00, custom function f7 allows you to take several photos without a CF card inserted. It does not allow you to continue shooting when the inserted card is full however, so you never risk missing a shot in the way you describe.
Had images taken with no card inserted been copied from the buffer to a newly inserted card, then this would have allowed you to swap cards without interrupting a shoot. Technically there’s no reason why it couldn’t have been done.
I’m STILL hoping Nikon release a new firmware version that adds a new custom function to allow the user to disable Auto ISO mode when shooting in manual. Auto ISO could have been extremely useful to me, but this oversight is as good as a bug. Has this been fixed on the D300?
4Richard says
Thanks much Neil! I have been using my D200 for almost a year now, but was still able to glean a few pointers from your tips to help me out. Your time spent in listing out these functions is much appreciated.
5Greg says
Thank you Neil for spending your time on us, Same as Richard i’m using my camera for about a year too. and i’m alwais looking for something new.
6Greg says
And is you help me too, would be really nice too, i’m still not really good on taking pictures at low light or at night, they almost always look somewhat yellowish or out of focus.
7Neil says
Greg, the best advice I can give you here is to shoot in RAW, and then adjust your image in one of the RAW conversion programs. That gives you the most flexibility in editing the image for correct (or pleasant) WB.
8Dpalmer says
WOW!!
First time on your site! It is awesome!gave me alot of answers on the D200.
9i. kellogg says
Am a D200 user, recently purchased an SB800 (no manual – just downloaded pdf file from net) and am trying to learn about setting my camera properly using the flash. While browsing the site, I came across the Custom Setting function page – and for the first time some of the fog has been lifted. Thank you so much for sharing your knowledge. Will explore your site more – but I really am grateful for the side trip I took.
10Ian phillips says
Hi I am the proud owner of a second hand D200, I have always had canon DSLRs before my last one being a 40D. So the menu system on the Nikon has had me confused, until I found this info. Thanks a lot , this is the most straight forward info on the confusing nikon menu system that I have found. Since learning the basics off your website. I’m now finding the D200 head and shoulders above the Canon 40D. Thanks…
11Scott says
how do I get rid of my custom settings?
12Neil vN says
Scott, on the top plate you should see that two buttons are marked in red. Press them both in simultaneously for a few seconds, and it should clear your custom settings (and a few other user settings.) Try this?