How to bounce your flash
The camera settings for this image: 1/160 @ f3.2 @ 800 ISO – using TTL flash; FEC at 0 EV. Those specific numerical values are less important to achieving that quality of light, than the thought-process about how to use the light. Ultimately, this really is about the Direction & Quality of Light.
A single flashgun, used directly, gives hard shadows because it is a small light source. The only way to soften the light, is to make the source of light larger. The most effective way of doing this with on-camera flash, is to bounce it. Not only do we have softer light then (because of it being a larger light source), but we also have the opportunity to make the light directional.
With this image, I bounced my flash to my left, and upwards. I wanted the light to come from an imaginary softbox near me. My approach to bounce flash photography indoors, is to consider it as if I am shooting in a studio with a single large softbox that I can position. For this reason, I try not to use the ceiling directly between myself and my subject to bounce my flash. That will usually create top-heavy light and shadows under their eyes … along with being flat light coming from the camera’s position.
If you bounce the flash off a wall to the side of you, or behind you, then the source of light relative to the subject, is much larger than if you had shot with the flash straight on. There is a world of difference.
For off-camera flash, we have a variety of choices how we can control our light source’s direction and quality of light. For on-camera flash, when working indoors with bounce-able surfaces around you, using bounce flash is a fast and effective way of dramatically improving the quality of light from our flash.
Just for comparison, here is the image without flash, so that it is clearly obvious how much flash was used in the top image. With the ambient light so low in the final image because of my choice of settings, what you see in the top image is nearly all light from the flash.
So where do I want my light to come from? Where would I have placed the softbox if I had been in a studio? This way of thinking usually gets me great results as in this photo above – the kind of light that it is difficult to tell whether off-camera flash was used, or effective bounce flash.
By bouncing off other surfaces like the walls or ceiling, you will also soften the light – if you’re using the correct angle. And here I want to stress something again – shooting with an omnibounce at 60 or 45 degrees, should not be a default way of using flash. For the best result, some thought needs to be put into how you use flash, and how you direct the light from your flash. Keep in mind that the intended result is to have no hard flash shadow. No tell-tale sign that on-camera flash was used.
On-Camera Flash Photography – revised edition
This book is explains a cohesive and thorough approach to getting the best from your on-camera speedlight.
Particular care was taken to present it all with a logical flow that will help any photographer attain a better understanding of flash photography.
You can either purchase a copy via Amazon USA and Amazon UK, or can be ordered through Barnes & Nobles and other bookstores. The book is also available on the Apple iBook Store, as well as Amazon Kindle. Also check out the Amazon Kindle store.
Learn more about how the cover image was shot.
Video tutorials to help you with flash photography
If you like learning by seeing best, then these video tutorials will help you with understanding flash photography techniques and concepts. While not quite hands-on, this is as close as we can get to personal instruction. Check out these and other video tutorials and online photography workshops.
Let’s look at an example where the light from the bounce flash is even more controlled:
Camera settings: 1/100 @ f3.2 @ 800 ISO .. using TTL flash; FEC at -1.3 EV
Looking closely at this photograph, you can see the interplay between light and shade on her face. Instead of flat lighting as we would get if we bounced directly behind us, the light came from somewhere behind and above us, from our left. The approach here was the same as in the first image – where would I have placed my softbox had I been in the studio. The quality of light here is as good as you would get from off-camera lighting. Yet, it is on-camera bounce flash. The difference comes in how the flash was bounced.
A key factor in both these images, was that there was NO light directly from my flash on my subject. All the light was indirect. If I bounce my flash by tilting and swiveling it, I get to bounce the light at an angle – away from the subject. Then the light that comes back, appears more directional. There are areas of shadow and light. Bounce flash need not look flat. By keeping the basic physics in mind of angles of incidence and reflectance, it is usually easy to figure out where to bounce from to enhance the available light, or how to make the bounce light soft but directional.
You can control the light from your on-camera flash, by flagging the light with a piece of black foam.
With this second image, the available light makes a difference in that it gives a nice background with some out of focus highlights. My camera settings were dictated by the available light. I wanted enough of the light to register in the background. Since I was shooting with TTL flash, I had control over the ambient light by my choice of shutter speed, aperture and ISO.
Materials for the flash modifier used – the black foamie thing
The BFT is held in position by two hair bands (Amazon), and the BFT is usually placed on the under-side of the flash-head.
The linked articles will give clearer instruction, especially the video clip on using the black foamie thing.
- Tutorial: Bounce flash photography
- Combining flash and available light
- Directional bounce flash
- Bounce flash and catchlights
- Throw away the tupperware on your flash
- Using bounce flash to mimic window light
TTL flash or manual flash?
Since I frequently shoot with TTL, I don’t often use the full power that the strobe is capable of, unless I’m using the flash at the extreme end of what it can push out. If your flash is your main source of light, it is important that you stay within the range of the flash’s output capabilities, with an appropriate iso and aperture selection.
Bouncing your flash reduces your flash’s output considerably – but your flash should compensate for this loss automatically if you shoot in TTL or Auto mode on the flash. That is, if you stay within the flashgun’s power range. If somehow the technology doesn’t quite match the theory here, just know that this is how your specific camera and speedlight responds … and dial in a new flash exposure compensation default when you bounce.
next section: On-camera flash outdoors
Help support this website